Many enterprise users can reflect that the maintenance and management of mud pumps are not complete. So how do we develop to maintain the mud pump scientifically? In fact, during the operation of the mud pump, the following issues should be paid attention to in time: whether the bearings of the mud pump accessories are normal; whether the body of the mud pump is vibrate; whether the mud pump is sealed enough.
In fact, to see whether the bearing is normal, only look at two aspects: one oil temperature should not exceed 60°C, and the second is whether there is a strange sound, usually there will be abnormal sound when there are damaged parts.
Vibration is usually seen, but when you see it, you know where the problem is, so that it can be solved in time. The reason is usually the vibration of the mud pump accessories: the error of the center pump and the motor; the screw pump or the motor feet are loose or not solid; the bearing is not tight enough; the mass of the rotor is unbalanced.
The degree of sealing of the mud pump accessories should be moderate, not too loose, and of course not too tight. The filler should be able to drip slightly so that we can extract the heat and the water. The packing used to achieve the seal should be regularly organized and replaced in time, otherwise it will not have a sealing effect after hardening.
In addition, mud pump heads, gearboxes, clutches, including cylinders, connecting rods and other parts need to be strengthened.